The round connector is a straight plug and pull steel ball quick lock round electrical connector shell assembly, which is composed of a plug and a socket. The plug shell assembly consists of a shell, a lock sleeve, a reed, a pin, a steel ball, and a steel ball, shrapnel, shrapnel, gaskets composed of nine parts.
After the lock sleeve and the housing are assembled, the pin is loaded into the housing and riveted to the lock sleeve. Between the lock sleeve and the housing is provided with a rotation of 20 degrees. The plug housing is equipped with 3-4 steel balls, plays a role of butt locking, and locks. The sleeve is provided with a straight groove. When the steel ball is not supported, it is fully retracted into the housing wall. After inserting and locking, the rotating lock sleeve supports the steel ball to protrude from the inner wall of the housing and extends into the annular groove on the socket housing to realize the plug and The lock of the socket. It also has the advantages of anti-sliding, anti-misplugging, excellent electrical performance and shielding performance, anti-vibration, impact resistance, environment resistance, etc. The locking and unlocking is convenient and quick, and the volume is small and convenient to use.